Turn On The Computer - Panasonic CF-33 Serie Instrucciones De Funcionamiento

4
<For tablet>
4
4

Turn on the computer

Press and hold the power switch
E
CAUTION
l Do not press the power switch repeatedly.
F
l The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer.
l Do not perform the following operation until the First-time Operation is completed.
Ÿ <Only for model with keyboard base> Touching the release lever (E) and detach lock (F)
Ÿ <Only for model with keyboard base> Detaching the tablet from keyboard base
Ÿ Connecting or disconnecting the AC adaptor
Ÿ Pressing the power switch
Ÿ <Only for model with keyboard base> Closing the display
Ÿ Any changes from the default setting of the Setup Utility
l Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.
l When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait
until the computer cools down, and then turn the power on again. If the computer does not power on even
after cooling down, contact Panasonic Technical Support (è
Manual").
5
<For MUI OS model>
Select language and OS (32-bit or 64-bit).
CAUTION
l Carefully choose your language because you cannot change it later. If you set a wrong language, you need to
reinstall Windows.
A Select language and OS (32bit or 64bit) on "Select OS" screen and click [OK].
The language setting will start by clicking [OK] on the confirmation screen.
The language and OS setting will be completed in about 15 minutes.
B When termination screen is displayed, click [OK] to turn off the computer.
C Turn on the computer.
6 Setup Windows
Select language and click [Next].
Follow the on-screen instructions.
l The computer restarts several times. Do not touch the touchscreen, external keyboard or external
mouse, and wait until the drive indicator
l After the computer is turned on, the screen remains black or unchanged for a while, but this is not a
malfunction. Wait for a moment until the Windows setup screen appears.
l During setup of Windows, use the touchpad and clicking to move the pointer and to click an item.
l Setup of Windows will take approximately
Go to the next step, confirming each message on the display.
l You can set the Wireless Network after the setup of Windows is complete.
l We recommend that you set the password after the setup of Windows in complete.
l
A When "Enable sensors" is displayed, click [Enable this sensor].
B When the [User Account Control] screen is displayed, click [Yes].
C At the [Display Rotation Tool] confirmation screen, click[Yes].
The computer restarts automatically, and the setting is enabled.
CAUTION
l You can change the user name, image and security setting after setup of Windows.
l Use standard characters as a computer name: numbers 0 through 9, uppercase and lowercase letters from A to
Z, and the hyphen (-) character. Do not use the following words and characters for user name: CON, PRN, AUX,
CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space,
If the error message "The computer name is not valid" appears, check if characters other than the above are
not entered. If the error message still remains on the display, set the key entry mode to English ("ENG") and
enter characters.
l
In particular, if you create a user name (account name) that includes the "@" mark, a password will be
requested at the log-on screen, even if no password has been set. If you try to log on without entering a
password, "The user name or password is incorrect." may be displayed and you will not be able to log on to
Windows (è
until the power indicator
has turned off.
If "Let's get connected" is displayed, you can select [Skip this step].
"Join a wireless network" screen may not appear.
Follow the steps below.
"OPERATING INSTRUCTIONS - Reference Manual").
lights.
"OPERATING INSTRUCTIONS - Reference
5 minutes / 20 minutes.
@.
11