To A530058 Remote Control With 4 Independent Channels; To Button Connected To The Wired Switch - Cherubini A510073 Manual De Instrucciones

A530058 remote control with 4 independent channels
Each time the programmed button is pressed briefly (<1 sec), outputs
1 and 2 are turned on and off, as indicated in the sequence:
• The first time the button is pressed it turns on both outputs.
• The second time the button is pressed it turns off both outputs.
Command sequence example:
1
1
ON 1-2
With the outputs switched on, each time the programmed button is
pressed long (>1 sec), outputs 1 and 2 both change in brightness: the
first time they increase in intensity, the next time they decrease and
so on, alternating.
2
2 1 2
OFF 1-2
Button connected to the wired switch
Each time the button is pressed briefly (<1 sec), outputs 1 and 2 are
turned on and off, as indicated in the sequence.
• The first time the button is pressed it turns on both outputs.
• The second time the button is pressed it turns off both outputs.
Command sequence example:
1
1
ON 1-2
With the outputs switched on, each time the button is pressed long
(>1 sec), outputs 1 and 2 both change in brightness: the first time
they increase in intensity, the next time they decrease and so on,
alternating.
25
2
2 1 2
OFF 1-2
GB