Important Safety Instructions; Safety Precautions - Samsung SCC-C4207 Guia Del Usuario

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades with
one wider than the other.
A grounding type plug has two blades and a third
grounding prong.
The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus.
13. Unplug this apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid
injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
1

Safety Precautions

The purpose of safety precautions is to prevent accidental
injury or property damage. Always observe all safety
precautions.
❖ The precautions are divided into "Warnings" and
"Cautions" as distinguished below:
Warning
Ignoring this precaution
may result in death or
serious injury.
Warnings
1. Be sure to use only the standard adapter which is
specified in the specification sheet.
Using any other adapter could cause fire, electrical
shock, or damage to the product.
2. Check the external connection terminals first before
connecting the power source and signal wires.
Connect the alarm signal wires to the alarm terminals.
Connect the DC12V power adapter to the SCC-
C4207(P) power input, making
sure that the currect polarity is observed.
Connect the DC12V or AC24V power adapter to the
SCC-C4307(P) power input.
3. Do not connect multiple cameras to a single adapter.
(Exceeding the capacity may cause abnormal heat
generation or fire.)
Caution
Ignoring this precaution
may result in injury or
damage to property.
E
2