Extension Cord - Fein KBM32Q Manual De Instrucciones

3 41 01 011 21 0.book Seite 6 Montag, 8. Februar 2010 11:51 11
en
6
Emission values for sound and vibration (Two-figure – specifications as per ISO 4871)
Sound emission
Measured A-weighted sound power level L
Measuring uncertainty K
A-weighted emission pressure power level measured at the workplace L
in decibels: 84
Measuring uncertainty K
C-weighted peak sound pressure level measured at the workplace L
Measuring uncertainty K
pCpeak
Vibrations
Vibration emission value (triax vector sum) determined according to EN 60745
2
m/s : 0.5
2
ft/s : 1.5
Measuring uncertainty K, in
2
m/s : 1.5
2
ft/s : 4.5
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear ear protection!
Measured values determined in accordance with the corresponding product standard.

Extension cord

If the use of an extension cable
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
applicational case, in order to prevent a volt-
age drop in the extension cable, power loss and
overheating of the power tool. Otherwise, the
extension cable and power tool are liable to
electrical danger, and the working efficiency is
impaired.
Intended use of the power tool.
core drill for drilling with core and solid drill
bits, on materials with surfaces suitable for
magnets in weather-protected environments
using the application tools and accessories
recommended by FEIN.
(re 1 pW), in decibels: 95
wA
, in decibels: 3
wA
, in decibels: 3
pA
: 3
, in decibels
Recommended dimensions of extension cords
at an operating voltage of 120 V – single-phase
a. c., with only one power tool KBM32Q con-
nected:
, in decibels
pCpeak
Cord Size in A.W.G.
16 14 12
Cord Length in Feet
50 100 150
(re 20 µPa),
pA
: 99.5
, in