Axxess AXUSB-HK Instrucciones De Instalación

USB adaptor for Select Hyundai/Kia Models
The AXUSB-HK is used when you want to retain the OE USB port on select Hyundai/Kia
vehicles (radio utilizes rear USB input). In addition we included RCA's to allow the user to
retain their factory installed 3.5mm jack. (Aftermarket radio must have Aux in)
HYUNDAI
Elantra Touring
Elantra
Genesis Coupe
Sonata
Tucson
Santa Fe
Sonata
Tuscon
Veracruz
1. Connect the White RCA to your aftermarket radio left AUX in (if equipped)
2. Connect the Red RCA to your aftermarket radio right AUX in (if equipped)
3. Connect the USB to the rear USB of the aftermarket radio (if equipped)
Note: Audio devices connected through the 3.5mm jack will be controlled from the audio
device, not the aftermarket radio.
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
INTRODUCTION
APPLICATIONS
KIA
2009-2012 Amanti
2013 Borrego
2010-2013 Forte
2011-2013 Optima
2010-2013 Optima (aux only)
Rio
2009-2013
Sedona
2011-2013
Sorento
2010-2013
Soul
2009-2013
Sportage
Sportage (with 5" monitor, w/o NAV) 2017
INSTALLATION
Integrate • AxxessInterfaces.com
AXUSB-HK
INSTALLATION INSTRUCTIONS
REV. 1/23/20
2009
2009
2010-2016
2011-2013
2008-2010
2009-2013
2009-2012
2011-2013
2010-2014
2011-2016