Publicidad
Enlaces rápidos
Model #
961KFSIc
SIENNA FINISH
Somerset Glider
44"
Assembly Instructions
Your piece of GardenWood furniture has been
finished at the factory with a tinted, penetrating oil that
contains both UV and anti-fungal inhibitors. For best
results, especially in extreme climates, another coat
of protective oil is recommended before using for the
first time. A surface coating is vital for the protection
of your furniture. Treatment should be applied at least
once or twice a year.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
Not intended for use by children without adult
supervision.
Use caution when moving bench due to swinging
legs.
Presented by Whittier Wood Products
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and
Maintaining the Beauty of GardenWood Furniture
completely before beginning.
Inspect your furniture periodically for any loose
glue joints or screws, or any other problem which
may be affecting the stability of your furniture.
Tighten or repair as needed.
Production Code:
VN
We will replace any
Rev. 10/08
Publicidad
Manuales relacionados para Whittier Wood Products GardenWood Furniture Somerset 961KFSIc
Resumen de contenidos para Whittier Wood Products GardenWood Furniture Somerset 961KFSIc
- Página 1 Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
- Página 2 961KFSIc Somerset Glider 44" – Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model name. Nc – Back – Qty. 1 Lc –...
-
Página 3: Tools Required
961KFSIc Somerset Glider 44" ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Hex Wrench (provided), Phillips Screwdriver, Adjustable Wrench, Mallet or Padded Hammer, Outdoor Wood Glue NOTE: Center Brace of Seat (Pc). Fig. 1 1. Spread a thin film of glue in the dowel holes in each end of the Back (Nc), Front Apron (Oc) and Center Brace of Seat Assembly (Pc) and insert Dowels (C) as shown in Figure. - Página 4 Fig. 3 3. Spread a thin film of glue in the dowel holes in the Left Leg Assembly (Lc). Insert dowels of back/seat assembly and wipe off excess glue with a damp rag. Using the provided Hex Wrench (Kc), secure the Left Leg Assembly (Lc) to the Back, Seat and Apron with 7x70mm Hex Screws (Ac). See Figure 3.
- Página 5 BACK Fig. 5 FRONT 5. Glue 10x40 Wood Dowels (C) in the two outer holes of the three-hole groups in the Left and Right Glider Leg Assemblies (Qc & Rc). Attach the Glider Leg Supports (Sc) to the Left Glider Leg Assembly (Qc) with Dowels (C) and 7x70mm Hex Screws (Ac).
-
Página 6: Acabado Sienna
Modelo # 961KFSIc Banca Mecedora Somerset de 44" Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se ACABADO SIENNA dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Instrucciones para Armar Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto. - Página 7 961KFSIc Banca Mecedora Somerset Lista de piezas Identifique las piezas y verifique que las cantidades recibidas coinciden con las de esta lista. Si tiene que reemplazar una pieza, indique la letra y el nombre del modelo que vienen a continuación. Cant.
- Página 8 No. de modèle 961KFSIa Balancelle Somerset de 111,76 cm (44 po) Politique de service : Nous remplacerons toutes les pièces défectueuses, manquantes ou FINIR SIENNA endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Instructions de Montage Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
- Página 9 961KFSIc Balancelle Somerset Nomenclature des pièces AVANT DE COMMENCER LE MONTAGE, assurez-vous que les quantités de pièces reçues correspondent à celles de la nomenclature des pièces figurant ci-dessous. Si vous devez remplacer une pièce, veuillez vous référer à la liste le nom et le numéro de la pièce.
-
Página 10: General Maintenance
Presented by Whittier Wood Products In order to maintain the appearance and life of this GardenWood Furniture™ product, please follow these instructions. Finishing Tips A surface coating is vital for the protection of your furniture. Treatment should be applied at least once or twice a year.