HAMPTON BAY 59918 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
7
Mounting the fan-motor assembly
(standard mount)
□
Align the locking slots of the canopy (C) with the two
screws (II) in the mounting bracket (A). Push up to engage
the slots and turn clockwise to lock in place.
□
Firmly tighten the two mounting screws (II).
□
Install the two canopy screws (HH) (saved from Assembly
Step 1 "Prepairing for mounting") into the holes in the
canopy (C) and tighten firmly.
□
Install the decorative canopy ring (FF) by aligning the ring's
slots with the screws in the canopy (C). Rotate the ring
clockwise to lock in place.
Assembly - Attaching the Fan Blade
1
Attaching the blade to the motor
□
Attach a blade (F) to the fan motor housing (E) by inserting the
blade (F) into the slot in the side of the fan motor housing (E)
until it stops. The locking clip will click twice when the blade
is correctly installed. Ensure the blade is snapped into locking
clip (LL) completely by pulling the fan blade away from the
motor housing.
□
Repeat these steps for the remaining blades (F).
II
11
Please contact 1-855-HD-HAMPTON for further assistance.
A
B
HH
FF
C
D
E
E
LL
F
HAMPTONBAY.COM