Vacuum Cleaning - Dirt Devil INFINITY REBEL 55 Manual De Instrucciones

2 Use
2.1 Assemble appliance and adjust nozzles to surface
2 Use
1
click!
click!
6
WARNING:
Danger of injury! Only attach the appliance parts when the appliance is
not connected to the power supply. Otherwise the machine might start
up and parts of your body, hair or pieces of clothing might be sucked in.
CAUTION:
Before assembling, make sure that the fitted nozzle suits the surface to
be cleaned. Do not clean e.g. any floors or objects with a brush with
rotating bristles that you would not clean without a second thought with
a conventional brush. Also observe the flooring manufacturer's recom-
mendations.
NOTE:
You might have to twist the parts when connecting them so they are
securely in place. Ensure that installed parts are secure by trying to pull
them apart.

2.2 Vacuum cleaning

11
WARNING:
Danger of injury! Check appliance and power cord before each use.
A damaged appliance must never be used.
CAUTION:
Only use the appliance with all filters undamaged, dry and correctly fit-
ted. Make sure that no objects obstruct the telescopic tube, the suction
hose or other openings.
1. Pull the cable out of the appliance (Fig. 11) and plug into a socket.
WARNING:
Danger of electric shock! If the red marking shows (Fig. 12) retract the
cord by pressing the retraction button ( ) to pull in the cord up to the
yellow mark (Fig. 13) again. Otherwise, the power cord may be dam-
aged.
12
2
7
12 13
3 4
optional
option
optioneel
opcional
opzionale
opsiyonel
9
8
1. Connect suction hose and appliance (Fig. 1).
2. Insert the accessory included in the scope of delivery onto the handle
(Fig. 2 - 10) depending on what type of surface you want to vacuum:
- Furniture brush (Fig. 2) for objects with a sensitive surface
- Crevice nozzle (Fig. 3) for crevices in upholstery
- Upholstery nozzle (Fig. 4) for upholstery, mattresses, and the like
- Optional mini turbo brush (Fig. 5) for non-sensitive upholstery,
runner, mats, and the like
- Floor nozzle with switch position as in Fig. 8 for carpets
- Floor nozzle with switch position as in Fig. 7 for hard floors
- Optional parquet brush (Fig. 9) for sensitive hard floors
- Optional hard floor nozzle (Fig. 10) for hard floors with crevices
3. Ensure that the bypass vent is closed (Fig. 15).
4. If you use the telescopic tube, adjust its length.
2. Switch on the appliance using the on/off switch ( ) (Fig. 14).
NOTE:
The auxiliary air regulator (Fig. 15) must be completely closed for vac-
uum cleaning. With the auxiliary air regulator you can quickly reduce the
suction power, to release objects (such as curtains) that have been
sucked in. If the hard floor nozzle (Fig. 10) has become stuck to the
floor, you can reduce the suction power just as easily using the bypass
vent (Fig. 15).
3. Vacuum clean.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs make sure
that you always stand on a higher level than the appliance.
5
optional
option
optioneel
opcional
opzionale
opsiyonel
optional
option
optioneel
opcional
opzionale
opsiyonel
10
14
( )
15