Specifi Cations And Performance - FujiFilm EF-X20 El Manual Del Propietario

Specifi cations and Performance
Guide Number (ISO 100, m) 20 (12 when wide panel is used)
Color temperature Approximately 5600 K at full power
Eff ective TTL fl ash range =
Manual fl ash output ⁄, ½ , ¼ , ⁄, ⁄, ⁄, or ⁄
Exposure compensation +1 to –1 in increments of ⁄ EV
Slave mode Available (pre-fl ash and non–pre-fl ash
control supported)
Power source Two AAA alkaline or Ni-MH batteries
Operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Dimensions (H × W × D) 36.0 × 59.5 × 50.0 mm (1.4 × 2.3 × 1.9 in)
Weight Approximately 100 g (3.5 oz),
excluding batteries
Guide ISO sensitivity
× ÷ f-number
Number
ISO 100
Battery Endurance and Initial Recycling Time at Full Power Battery Endurance and Initial Recycling Time at Full Power
AAA alkaline batteries ×2 AAA alkaline batteries ×2
AAA Ni-MH batteries ×2 AAA Ni-MH batteries ×2
ndurance measured using fresh batteries manu-
R Battery e
factured within the previous three months. The number
of uses is the number of times the fl ash can be fi red at
intervals of 30 seconds; the count ends when the TEST
button (READY lamp) takes more than 30 seconds to light.
R The recycling time is the time needed after the fl ash fi res
for the TEST button (READY lamp) to light, as measured un-
der the conditions described above.
ENGLISH
Number of uses Number of uses Recycling time Recycling time
Approx. 60 Approx. 6 s
Approx. 90 Approx. 5 s
EN-5