Publicidad
Step 23
å
NOTE: Pay close attention to the positioning of the parts in this step.
å
Carefully turn one of the DRAWER MOUNTS (P) over.
å
Fasten the CABINET RIGHT (40CA) to the turned over DRAWER MOUNT (P).
Use two GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3 and
into the surface without TWIST-LOCK® FASTENERS.
å
Fasten the CABINET LEFT (40CB) to the other DRAWER MOUNT (P). Use two
GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3 and into the
surface with TWIST-LOCK® FASTENERS.
GOLD 5/16" FLAT HEAD SCREW
Roller end
1
Finished edge
3S
(4 used for the RAILS)
4
3
2
P
2
3
4
P
Roller end
1
Finished edge
Page 29
Publicidad
