Marklin Digital 764 Serie Manual De Instrucciones página 5

Setting Decoder Parameters with the Central Station 2/3 / Mobile Station 2
At the present time the m83 / m84 / signal can be programmed only in the DCC mode and on a
programming track.
1. Entering a locomotive with a DCC type decoder (see instructions for the Central Station or
Mobile Station)
2. Setting the DCC mode with switch 10 on the m83 / m84 / signal.
3. Going into the CV programming mode for the locomotive being entered.
4. Entering, changing, storing the desired CVs.
5. After all of the changes have been programmed and stored, set the m83 / m84 / signal back to
MM with switch 10. All of the changes have now taken effect.