Kokido TELSA 30 Manual De Usuario página 15

 Emptying the filter bag
1. Place the pool vacuum on a stable surface.
2. Press the locking button until the locking hole on the clear canister is released.
Slide the canister away until the notch on the bottom of canister opening is released
from the hook on the bottom of main body. Remove the filter bag from the main body.
CAUTION! Replace the damaged filter bag immediately before the next operation.
3. Clean out the debris and rinse the filter bag with water. If brushing is deemed
necessary, use only a soft brush to clean the bag gently and carefully.
4. Re-position the filter bag inside the main body. Make sure the net is completely
inserted inside the main body and does not stick out.
To re-install the canister, first align the notch of the canister with the hook on main
body and then press the canister onto main body. Make sure the locking hole on the
clear canister is secured with the locking button.
14