How To Remove The Battery Pack - Kokido TELSA 30 Manual De Usuario

WARNING!
Never attempt to disassemble a battery pack
 Remove all personal items such as rings, bracelets, necklaces and watches when
the battery pack is unwired from the pool vacuum.
 A battery can produce a short circuit current high enough to weld a ring (or similar
item) to metal, causing a severe burn in the process.
 Wear complete eye protection, gloves and protective clothing when the battery
pack is being removed.
 Avoid touching the wires altogether and avoid allowing them to make contact with
any metal items, which could cause sparking and/or short circuit the battery.
 Never smoke or allow a spark or flame in the vicinity of the battery or the pool
vacuum.
 Do not expose the battery to fire or intense heat as this may result in an explosion.
CAUTION!
If a battery leak occurs, avoid contact with the leaking fluids and place the damaged
battery in a plastic bag.
If leaking fluids come in contact with skin and clothing, wash immediately with
-
plenty of soap and water.
If leaking fluids come in contact with eyes, immediately flush eyes with cool
-
running water for at least 15 minutes and do not rub them. Seek medical attention
as soon as possible.

How to remove the battery pack

Recommended tools (not included): Philips screwdriver and small slot
screwdriver.
1. Press on the locking button and detach the clear canister from the body. Use
a small screwdriver to detach the ring from the body. It is hard to detach the
ring by screwdriver, use cutting plier to cut.
2. Use Philips screwdriver to unscrew all the screws on the main body.
16