Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 63
7
Other versions
D
ESIGNATION
A . . . . . . . . . . . Cut-off (PN block only)
W. . . . . . . . . . . Heat resistant
N . . . . . . . . . . . Low resistance
S . . . . . . . . . . . Silicone seal (fibre optic blocks only)
Z . . . . . . . . . . . Centring (for interface blocks with centring)
xxx. . . . . . . . . . Plug / connector designation (SO blocks only)
Plan . . . . . . . . . Contact termial with a flat contact surface
x,x . . . . . . . . . . Bore diameter in the contact terminal in mm
RD . . . . . . . . . . Round posts (round wire wrap posts)
8
Version (if not INGUN standard)
D
ESIGNATION
-xx,x. . . . . . . . . GKS installation height, if not standard
-xxxx . . . . . . . . Customer name added if designation is not clear (max. 5 characters, ab-
3)

Safety

3.1)
Danger levels of warnings
Meaning of the signal words used here:
S
M
IGNAL WORD
DANGER
I
MMEDIATE DANGER OF DEATH OR SERIOUS INJURY
WARNING
P
CAUTION
P
ATTENTION
P
NOTE
A
3.2)
Criteria relating to staff
All work on the interface blocks may only be performed by specially trained staff. Pre-requisites:
 Mechanics: completed qualification in industrial mechanics
 Electrical engineering: completed qualification in electrical engineering
 For all other sectors (e.g., transport, test operation, storage and disposal): knowledge of these
operating instructions of these operating instructions of these operating instructions
In general:
 The clothing worn by the person operating or maintaining the interface blocks must not present
any hazards (no jewellery, no loose-fitting garments such as ties, scarves, etc., long hair must
be tied back).
 The persons operating or maintaining the interface blocks may not be under the influence of
medication, drugs or alcohol.
3.3)
Liability for misuse
INGUN assumes no liability for damages caused by non-compliance with the operating instruc-
tions, or lack of testing to ensure the technically perfect and safe state of the interface blocks.
3.4)
Safety instructions
WARNING
L
ETHAL ELECTRIC SHOCK
Hazardous electrical voltage on the test probes at > 25 VAC and >60 VDC!
15
V
ERSION
V
ERSION
breviated if necessary)
/ C
EANING
ONSEQUENCES IF DISREGARDED
OSSIBLE RISK OF DEATH OR SERIOUS INJURY
OSSIBLE RISK OF MODERATE OR MINOR INJURY
OSSIBLE DAMAGE TO PROPERTY
DDITIONAL INFORMATION AND USEFUL TIPS
©
INGUN, errors and technical changes reserved
English

Publicidad

loading

Productos relacionados para Ingun SB-SI-170-4A Serie