Minebea Intec YAS02CI Instrucciones De Instalación página 4

Power
100V-240V
50/60Hz
15VA
Power
15.5V-24V =
13V-17V ~ 50/60 Hz
12W
4
4
YAS02CI (Option: L8)
● Loosen the 2 clamp screws (1) and disconnect the
2 power cable leads from the power module.
● Disconnect the ground wire (earth) (2).
● Unplug the cable that connects the power
module to the main PCB (3).
● Open the cable gland and remove the power cord
from the gland.
● Remove the fastening screws from the power
module (4).
● Remove the power module from the indicator.
● Remove the input voltage label ("100V–240V")
from the back of the indicator housing.
● Affix the enclosed voltage label in place of the
old label.