Axxess AXRC-GMLN3 Instrucciones De Instalación página 3

Wire connections to be made
AXRC-GMLN3 harness:
• Connect the Yellow wire to the radios constant/memory wire.
• Connect the Red wire to the radios accessory wire.
• Connect the Black wire to the radios ground wire.
• Connect the Blue wire to the radios antenna turn on.
• Connect the White wire to the radios left front (+) speaker wire.
• Connect the White/Black wire to the radios left front (-) speaker wire.
• Connect the Gray wire to the radios right front (+) speaker wire.
• Connect the Gray/Black wire to the radios right front (-) speaker wire.
• Connect the Green wire to the radios left rear (+) speaker wire.
• Connect the Green/Black wire to the radios left rear (-) speaker wire.
• Connect the Purple wire to the radios right rear (+) speaker wire.
• Connect the Purple/Black wire to the radios right rear (-) speaker wire.
• Connect the Orange/White wire to the illumination wire of the aftermarket radio.
If the aftermarket radio has no illumination wire, tape off the Orange/White wire.
Note: If the radio you
are installing requires
more then 3-amps on
the accessory wire, or
you are adding another
accessory to the wire
(i.e. hard wire radar
detector) then a relay
will be needed to supply
the additional current.
See diagram.
AXRC-GMLN3
12v Accessory from
LC-GMRC-LAN-03
Red
3
+12v Battery Fused
SPDT Relay
87
85 86
87a
30
To Radio