JOPIX MARINE 515P Manual De Instrucciones página 39

5. [SCAN] / [DUAL] key:
● Push to start or stop scan mode (including normal and priority scan).
● Hold for 1.5 seconds to enter the Dual/Tri-watch mode.
● Push to exit the watch mode.
● Hold this key and [H/L] key for 1.5 seconds, to activate the AquaQuake function.
6. [▼] key:
● Push to select an operation channel in normal mode.
● While in the Set mode, push to select the setting or value of an item.
7. [H/L] / [Lock] key:
● Push to select the high or low output power.
● Hold for 1.5 seconds to turn the lock function ON or OFF.
8. [▲] key:
● Push to select an operation channel in normal mode.
● While in the Set mode, push to select the setting or value of an item.
9. [SQL] / [MONI] key:
● Press this key, then press [▲] / [▼] key to adjust squelch level.
● Hold for 1.5 seconds to manually open squelch and active the monitor function.
● While hold this key, press [ ] key to turn ON the power and enter the set mode.
10. [FAV] / [TAG] key:
● Hold this key, then press [▲] / [▼] key to sequentially select the favorite/teg channels,
while ignoring untagged channel.
● Hold for 1.5 seconds to set or clear the TAG for the display channel.
● While holding this key, press [ ] key to power on to clear or set all TAG channels in the
selected channel group.
11. [CH] key:
● Press this key to switch between normal channel group and weather channel group.
● Hold for 1.5 seconds, to select a channel group of USA, International and Canada.
● Push to return to the previous channel before selecting Channel 16 or the Calling
channel.
12. LCD display:
13. Microphone.
14. Speaker:
15. Antenna connector.
English - 11 -