Redmond RMC-PM381E Manual Del Usuario página 9

To protect against overheating, the maximum running time of a program is limited to 2 hours when the cooking temperature
is set above 150°С.
Setting Pressure Level
When using the pressure cooker mode programs, it is possible to change the pressure level manually. Press the
go to the pressure setting. The indicator and pressure level scale on the display start to blink. Use the
tons to adjust the pressure. The number of marks on the pressure level scale changes symmetrically. Once the maximum/
minimum value is achieved, the setting starts from the beginning/end of the range. For rapid change of a value, press and
hold the appropriate button.
Do not press any button on the panel for several seconds. The changes are saved automatically. The display returns to indi-
cation of the cooking time value, the pressure indicators stop blinking.
Once an automatic program starts up, the pressure level indicator blinks until the device achieves the installed working
characteristics. The pressure level scale is gradually completed up to the installed value. After achieving the working char-
acteristics, both indicators continue to light until the end of cooking process.
Time Delay function
The Time Delay function enables setting of the time interval after which a cooking program starts. The time may be set in
the range of 1 minute to 24 hours with an increment of 1 minute.
After selecting an automatic cooking program, press the
value on the display starts to blink. Press the and buttons to set the desired hour value. Press the
the entered changes and to go to the minute value setting. Set the minute value in the same manner. Do not press any
button on the panel for several seconds. The changes are saved automatically. To return to the hour value setting before
autosave, press the button again. After autosave, the
returns to the indication of cooking time. To see the time delay value, press the
The hour and minute values are changed independently of each other. Once the maximum/minimum value is achieved, the
setting starts from the beginning/end of the range. For rapid change of a value, press and hold the appropriate button.
The Time Delay function is not available when using the FRY and EXPRESS programs.
When the Time Delay function is active, the indicator of selected program and
timer is indicated on the display and the indicator lights up (if the Keep Warm function is active). To see the time of
cooking program, press the button.
Once the function work is over, the device gives three short audible signals and selected cooking program starts.
It is not recommended to use the Time Delay function, if the recipe contains perishable products (eggs, fresh mild, meat, cheese, etc.).
Keep Warm
This function automatically activates at the end of the cooking cycle and keeps the food warm at 70-75°С for 12 hours. When
Keep Warm is active, the button indicator and indicator light up and the display indicates the direct time count of
running in this mode.
If necessary, the Keep Warm may be disabled by pressing the
The Keep Warm function is not available when using the YOGURT/DOUGH and EXPRESS programs.
Preliminary Disabling of Keep Warm
Enabling the Keep Warm upon completion of a cooking program is not always desirable. Taking into account this fact, REDMOND
RMC-РМ381E Electric Pressure Cooker provides an option to timely disable this function while running of the main cooking
program. For this purpose, while running of a program press the
Warm again, press the button once again ( indicator lights up).
For users' convenience, the Keep Warm is disabled automatically without option to enable it manually when the cooking tem-
perature is set below 80°C. While running a program, the temperature is set above 80°C, the Keep Warm enables automatically.
Reheat
REDMOND RMC-РМ381E Electric Pressure Cooker can be used to reheat cold dishes. Proceed as follows:
1. Put all products to the bowl, install the bowl into the device frame.
button to
and
button to set the delay time. The indicator lights up, the hour
button to save
indicator goes off, the indicator lights up and the display
button.
indicator light up, the minute countdown
button.
button, the indicator goes off. To enable the Keep
2. Close the lid, connect the device to electrical outlet.
3. Press the button. The button indicator and
Once the temperature achieves 70°С, the device gives two short audible signals.
The device reheats the dish up to 70-75°С and keeps it hot for up to 12 hours. If necessary, reheat can be stopped by press-
ing the button. The indicator goes off and the device goes to the standby mode (– – – – on the display).
but-
Thanks to the Keep Warm and Reheat functions, the Electric Pressure Cooker can keep a product hot for up to 12 hours. However,
it is not recommended to leave a dish hot for more than 2-3 hours since sometimes this may result in change of its taste.
MASTERCHEF LITE Function
The MASTERCHEF LITE function enables changing of cooking time and temperature when running automatic programs in
the multicooker mode (except for EXPRESS program). The range and increment of cooking time depend on the selected
program. The temperature range is from 35 to 180°С with an increment of 1°С.
When the Time Delay function is enabled, the MASTERCHEF LITE function is not available.
The MASTERCHEF LITE function can be especially useful when cooking upon complex recipes that require a combination of
different cooking programs (e.g. stuffed cabbage, beef Stroganoff, soups and pasta to different recipes, fruit preserves, etc.).
To change cooking temperature:
1. When a cooking program runs, press the
When making further temperature change, the latest set value is displayed.
2. Press the and buttons to set the desired value. Once the maximum/minimum value is achieved, the setting starts
from the beginning/end of the range. For rapid change of a value, press and hold the appropriate button.
3. Do not press any button on the control panel for several seconds. The changes are saved automatically.
To protect against overheating, the maximum running time of a program is limited to 2 hours when the cooking temperature
is set above 150°С.
When changing the cooking time while achieving the working characteristics (if it is provided by the factory settings), the
preheating process is interrupted. The countdown of a program running starts. Changing of cooking time does not influence
on the process of preliminary heating.
To change cooking time:
1. When a cooking program runs, press the
2. Press the and buttons to set the desired hour value. Press the
to the minute value setting. Set the minute value in the same manner. Do not press any button on the panel for sev-
eral seconds. The changes are saved automatically. To return to the hour value setting before autosave, press the
button again. The hour and minute values are changed independently of each other. To quickly change a value, press
and hold the desired button.
3. Do not press any button on the control panel for several seconds. The changes are saved automatically.
If you set the cooking time to 00:00, the program stops running.
General Procedure for Using Automatic Programs
IMPORTANT! When using the water boiling device (for example, when boiling products), DO NOT set the cooking temperature
above 100°C. It may result in overheating and failure of the device. For the same reason, DO NOT use the BREAD, FRY and
BAKE programs to boil water.
1. Prepare (measure) the necessary ingredients.
2. Put the ingredients in the bowl in accordance with the cooking program and install the bowl it into the frame. Ensure
that all ingredients, including liquid, are below the maximum mark on the inner surface of the bowl. Ensure that the
bowl is aligned properly and is in tight contact with the heating element.
3. Close the device lid and turn it anticlockwise against stop.
ATTENTION! If you cook at high temperatures with much vegetable oil, always leave the device lid open.
4. For cooking in the pressure cooker mode, bring the steam valve to the Close positions, in the multicooker mode — to
the Open position.
RMC-PM381E
indicator light up, the timer begins to count the heating time.
button. The temperature value on the display starts to blink.
button. The hour value on the display starts to blink.
button to save the entered changes and to go
GBR
FRA
DEU
ITA
ESP
PRT
DNK
NOR
SWE
FIN
LTU
LVA
EST
ROU
HUN
HRV
SVK
SVN
CZE
POL
SRB
GRE
BGR
RUS
UKR
9