Dema MixRite Manual Del Usuario página 2

The MixRite
pressure. The water engine powers the proportioning unit. No
external power is required.
The proportioning unit injects liquid additives in direct relation to
the amount of water that passes through the motor and injects the
additives into the water system.
The water engine action:
The suction and proportioning unit is built from a piston connected
to the water engine, from which it derives its movement. The
piston moves within a cylinder with a non-return valve. The
movement of the piston within the cylinder causes the water to be
injected with the required liquid additive to be drawn through a
hose inserted into a container. It is possible to regulate the supply
ratio between the additive and the water passing through the
injector in models: 570(CW/CL/PVDF),572(CW/CL/PVDF),574CL,
571(CW/CL/PVDF),573(CW/CL/PVDF),575CL.
In model 571 Green the dosing is predetermined and can
not be changed.
In models 576IN, 578IN, 577IN, 579IN the drawn additive
is transferred through a inlet bypass directly into the main water
line, without contact with the water engine.
Air release valve
Water outlet
Suction unit with adjustable
proportional dosing
I-870
Rev F - 36742
User Manual
is powered by water flow, with minimal loss of
Water engine
Water inlet
Additive suction tube
Page 2 of 30