Dema MixRite Manual Del Usuario página 4

Installing the MixRite on a Direct Line (in line)
1. Install onto the water line using swivel connectors and ensure
2. Install a 50-75 mesh (250-300 micron) filter between the valve
3. Valves have to be installed at the water line entry and exit; in
4. Position the drawing pipe into the additive container. Ensure that
I-870
Rev F - 36742
Installation of the MixRite
that the water flows into the MixRite in the direction indicated by
the arrows printed on the MixRite.
and the injector intake.
order to stop the pump's action – you should close the Valve at
the entry point.
the suction pipe filter is set several millimeters above the
container's bottom. Check to ensure that the suction pipe is not
bent or folded.
Install the MixRite on a Direct Line (In Line)
Correct Installation Incorrect Installation
Page 4 of 30