Current Sensor; Disposal - Easy Home R09 Manual De Instrucciones

Current sensor and disposal

Current Sensor

The power supply cord contains a current sensor for your safety.
To test your power supply cord, do the following:
1. Plug in the air conditioner.
2. The power supply cord will have two buttons on the plug head. Press the TEST button.
You will notice a click as the RESET button pops out.
3. Press the RESET button. You will again notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit.
NOTE: Do not use the current sensor to turn the unit on or off. Always make sure the RESET
button is pushed in for correct operation.
The power cord must be replaced if it fails to reset either when the TEST button is pushed or it
cannot be reset. If the power cord is damaged, it cannot be repaired. It must be replaced by a
qualified technician.

Disposal

It is illegal to take your air conditioner to a landfill with the rest of your trash.
Check with your town/state regarding the legal way to dispose of your air conditioner.
8