Start-up
General Information
Proceed according to the order listed below and
first insert the batteries into the wireless outdoor
sensor. Only then can the weather station function
without flaws.
Do not use rechargeable batteries, since their
voltage is too low (only 1.2 V instead of 1.5 V). This
affects, among other things, the precision of the
measurements.
Where possible, use alkaline rather than zinc-
carbon batteries. Alkaline batteries last longer,
especially at low outdoor temperatures.
Wireless outdoor sensor
1. Push the battery compartment cover on the back
of the outdoor sensor open using a little force.
2. Insert two LR03/R3 (AAA) batteries as shown on
the bottom of the battery compartment. Observe
the correct polarity (+/-).
3. Slide the battery compartment cover back on.
Base station
1. Press down the locking tab of the battery
compartment cover and fold down the
compartment cover.
2. Insert two LR06/R6 (AA) batteries as shown on the
bottom of the battery compartment. Observe the
correct polarity (+/-).
Weather station with ventilation recommendation WS 2132
51