FlyCamOne Core Set V2 Manual De Uso página 17

Modes detailed
Video recording
The recording takes place with 30 pictures per second (30 FPS) with 720x480 px and a
consumption of storage of approx. 70 MB/min.
Recording is indicated by running dots"
indoor environment.
LOP
Video loop
Recording as above – however the free storage (min. 200 MB) of the SD-card is shared
and the old part will be overwritten consecutively.
The recording will be stopped not until
REC
Photo
The recording takes place with 720x480 px, one photo needs approx. 120 KB storage on
the SD-card. The FCOIII indicates the recording with a frame„
S04 – M60
Photo Loop
The FCOIII takes pictures every 4 seconds to 60 minutes. Modes displayed as follows
S04, S10, S20, S30, S60, M02, M10, M30, and M60 while S is for seconds, M for
minutes.
REC
Observation
The motion detection of the FCOIII activates the recording as long motion can be
detected in front. Please note that different Voltage Hertz-Systems need different
firmware – default Setup is 50Hz for Europe and 60 Hz for America.
LOP
Observation
Recording as above – however the free storage (min. 200MB) of the SD-card is shared
and the old part will be overwritten consecutively. The recording will be stopped not until
gets pressed.
Audio recording
Records sound only.
PLY
Play
Will allow watching the recorded videos and photos. Use
and play , stop
DEL
Detele Files
Will delete the last file by pressing
Downloading files and simultaneously charging
Connection to the PC in drive mode. FCOIII will be charged coevally when connected –
charging will take approximately 5 hours.
WC
Web Cam
Use FCOIII as Webcam. Download drivers before: www.FlyCamOne.com
V.3.03
REC
AUD
in this mode.
www.FlyCamOne.com
". FPS rate can be reduced by a dark or
gets pressed.
.
PC
".
to move