Veranda 34107832BOM Manual Del Usuario página 8

Mark all bracket holes (Fig. 8). Predrill all bracket holes
5
with ⁄ " drill bit (Fig. 9). ⁄ ⁄ ⁄
1 1 1
8 8
Drive screws through brackets into post (Fig. 10). For top
6
rail, use #10 x 2" self-tapping square drive screws (two
per bracket); for bottom rail, use #10 x 1
square drive screws (four per bracket).
Predrill one side (outside of the stair rail installation)
7
of the top rail bracket with
be oriented as shown, approximately
end of the bracket (Fig. 11). Drive #10 x 1" pan head
square drive screw through bracket and rail. Do NOT
overtighten.
8
⁄ ⁄ ⁄ ⁄ " self-tapping
1 1 1
4 4
⁄ " drill bit. Hole should ⁄ ⁄ ⁄
5 5 5
32 32
⁄ ⁄ ⁄ ⁄ " in from the
3 3 3
8 8
Fig. 8
Fig. 9
Fig. 10
Fig. 11