Tabla de contenido
Publicidad
Control descriptions
1) Start button "I"
Push the button to start up the machine. In the combined and grater
versions, start-up is only enabled when the grater lever is lowered.
2) Stop button "0"
Press the button to stop the machine.
3) Mincer filler knob (mod.AB12/T-L – AB22/T – TR12/S – TR22/SN
only)
Turn the knob to block (clockwise) or unblock (anti-clockwise) the mincer
filler. Do not start the machine until the mincer filler is blocked.
4) Mincer body blocking knobs (mod.AB12/AT – AB22/AE-T –
TR12/TS – TR12/C – TR22/TE – TR22/C only)
Screw down the knobs to block or screw off to unblock the mincer body.
5) Grater lever (mod. AB12/T-L-AT – AB22/AE-T – GR12/S only)
Press the lever down to grate the product to be processed.
6) Forward gear button (mod.AB12/T-AT – AB22/AE-T – TR12/S-C –
TR22/TE-SN-C only)
Press the button to start the machine. In the combined versions, start-up is
only enabled when the grater lever is lowered.
7) Reverse gear button (mod.AB12/T-AT – AB22/AE-T – TR12/S-C –
TR22/TE-SN-C only)
Press the button to invert the direction of machine rotation. In combined
versions, start-up is only enabled when the grater lever is lowered.
8) Stop button (mod.AB12/T-AT – AB22/AE-T – TR12/S-C – TR22/TE-
SN-C only)
Press the button to stop the machine.
Using the grater
•
In combined mincer-grater models, remove the mincer set before using the grater.
•
Lift the grater lever and place the product to be processed inside the grater mouth.
•
Lower the grater lever and press the start button "I" (the machine will only start if the grater lever is
lowered).
•
Gradually press the lever until the product is finished.
•
At the end of processing lift the lever and introduce more product into the grater mouth; lower the lever
once more and press start button "I" (the machine will only start if the grater lever is lowered).
•
In order to stop the machine, press the stop button "0" or lift the grater lever.
•
At the end of the work cycle, grate a piece of hard bread or use the appropriate brush to clean the roller.
OPERATION AND
CLEANING
9
3
Publicidad
Tabla de contenido
