g Operating Instruction
Contents
1. Package Contents
2. Notes
3. Connections
4. Hard Drive Installation
5. Driver Installation
1. Package Contents
• 3.5" hard drive enclosure
• 230 V power supply unit
• USB connection cable
• Installation instructions
2. Notes
The hard drive enclosure may never be
disconnected from the computer while data is
being transferred!
Your data could be lost.
Hama GmbH & Co KG does not accept liability
under any circumstances for loss of
data stored on storage media.
3. Connections
1. USB connection
2. Connection for power supply unit
3. Power On/Off switch
4. Operating LED
4
4. Hard Drive Installation
The following section describes how to insert/
install a hard drive into the 3.5" enclosure.
Use a Philips screwdriver to remove the two
screws on the rear of the housing.
Remove the back section of the housing and pull
the hard drive carrier out of the housing.
Place the hard drive on the carrier provided and
connect the hard drive. The hard drive does not
require a jumper for operation in the enclosure.