Then secure the hard drive on the hard drive
carrier using the screws provided.
The attachment holes are located on the sides of
the hard drive and the hard drive carrier.
Place the hard drive carrier back in the enclo-
sure and secure the rear section using both the
screws you removed in step 1.
5. Driver Installation
Windows 2000/XP/Vista/7 include driver
support for this hard drive enclosure, which
means that no additional drivers must be
installed.
6. Safety Notes:
• Do not operate the device in damp or dusty
environments.
• Only use the power supply unit provided for
the hard drive enclosure. Using another power
supply unit could damage or destroy the
sensitive electronics of the enclosure and
hard drive.
• Do not operate this device on heaters or near
heat sources
• This device is designed for indoor use only.
• This device is not designed for use outdoors.
• Protect the device from pressure and impact
during operation.
• Do not open or move the device during
operation.
7. Support information:
Contact your dealer or Hama Product Consulting
if you have a faulty product:
Support hotline – Hama Product Consulting:
Tel. +49 (0) 90 91 / 502 – 115
Fax. +49 (0) 90 91 / 502 – 272
E-mail: mailto:produktberatung@hama.de
Product information and new drivers can found
on the Internet at www.hama.com
5