Assembly And Use; Kit 10 M Tube And 10 Nozzles; Assembly; How To Assemble The Tube - Stocker 412 Manual De Instrucciones

Kit 10 m tube and 10 nozzles

The 10-metre tube is the ideal accessory for carrying out mosquito
repellent treatments in small gardens surrounded by fences, hedges
or other ornamental plants, and can generally be fixed around a
perimeter at strategic points to extend the range of treatments. It
comes with 10 ultra-fine spray nozzles and 10 quick T-connectors.
The tube and nozzle kit is not included in the package of the Geyser
nebulizers (Art. 410 and 411) but it can be purchased separately.

Assembly

How to assemble the tube

Users can assemble their own tube adding up to 10 nozzles:
1. Cut the tube at the points where you want to apply a nozzle
2. Insert the tube into the attachments of the quick connector
3. Insert the nozzle on the connector
4. To detach the tube from the quick connector, press the end ring of the connector and pull
the tube out.
18
Art. 412
Kit 10 m tube and 10 nozzles

Assembly and use

1
3
Art. 412
Kit 10 m tube and 10 nozzles
Assembly and use

Connecting the tube to the nebulizer

1. Remove a nozzle from the nebulizer: press the ring of the connector on which it is inserted,
then pull out the nozzle.
2. Connect the tube directly to the attachment previously used for the nozzle.
3. Close the end attachment of the quick T-connector of the tube with one of the plastic caps
provided.

Use of the caps

The three caps, if used to replace the nozzles, allow to stop the flow at the chosen points and
2
also to plug the end connection of the last T-connector.
1. Remove the nozzle from the quick connector: press the ring at the base and then pull the
nozzle out.
2. Insert the plastic cap in place of the nozzle.
4
For further information about the product, please contact info@stockergarden.com.
1 2 3
19