Nanoleaf Elements Guia De Inicio Rapido página 10

EN WARNINGS & CAUTIONS Please read this safety information carefully and keep this document for future reference. Help articles and
customer support is always available at http://go.nanoleaf.me/support. This Nanoleaf® product is not designed, certified, nor intended for
use in: enclosed locations that limit the flow of air and/or trap heat which contributes to an environment temperature over 40 degrees
Celsius; emergency exits, emergency lighting, or other use cases involving critical systems for human safety; in conjunction with 3rd party
devices that are not approved by Nanoleaf® for use with Nanoleaf® products; locations or use cases where there is a risk of electric shock;
outdoor areas, regardless of weather conditions; wet or damp conditions; as a floor covering or floor tiling; excessively hot environments
that are consistently above 40 degrees Celsius for extended periods of time (for example: near ovens, space heaters, clothing dryers);
excessively humid areas; regions or countries other than that in which the product was intended for and certified for sale in. When using this
Nanoleaf® product: Do not open or disassemble the device, as this will void the warranty and make the product unsafe for use. While
connected to the electrical supply of the building, line voltages will be present in the power supply, panels, linkers, so do not place any
metallic or conductive objects near any exposed metal contacts on any component. Unplug the power supply unit from the power source
before dismounting light panels. Do not allow small children to operate this device without adult supervision. This device contains small
parts that may be a choking hazard to small children. Loose or dangling cords may cause an entanglement hazard to small children. Do not
leave cords dangling or loose on the floor to help prevent accidents from tripping. Do not clean the device with liquid or sprays when it is
connected to power. Clean the panels with a soft dry cloth, and do not use harsh cleaning agents. Do not step on any part of the device, as
this will cause breakage. Do not submerge any part of the device in water, or expose any part of the device to water. Do not bend or flex
the panels with the connector still attached, as this will cause breakage. Do not attach the panels together with any connector or device
other than original equipment manufactured by Nanoleaf®. Do not puncture any part of the device with sharp objects, as this will cause the
device to cease working as designed and may present a safety hazard. If adhesive tape is a component of this product, please note that it
is not designed to be used with unpainted brick wall, wallpaper, uneven/textured surfaces, or highly porous surfaces. If applicable, do not
use double-sided tape to attach any part of the device to a ceiling or surface greater than 90 degrees relative to the floor, as the device
will eventually fall down—creating a safety hazard and risk of damage to the device. Optional secure mounting solutions for these use cases
are available, sometimes through added accessories o ered for purchase separately. Your warranty DOES NOT COVER damage caused by
falling devices. The flexible cable and power supply cannot be replaced by another third party product. If the cable is damaged, the entire
controller and power supply should only be replaced with original equipment manufactured by Nanoleaf®. Using any non-approved
replacement component will void the warranty and may present a serious safety hazard. Nanoleaf® light panels are primarily intended for
decorative use, with tunable white output function that can dim.
WI-FI/RF The normal use of your device does not allow a usage with a separation distance of less than 20 cm. The antenna is fixed with the
device and not exchangeable by the end user.