Nanoleaf Elements Guia De Inicio Rapido página 5

Make sure you have enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W. Use our PSU calculator online at go.nanoleaf.me/myelements.
To mount, apply strong pressure
in a circular motion to the center of
the panel for 30 seconds.
Important Installation Tips
1x
The Controller and Power Supply
Unit can be connected to any panel
in your setup.
42W
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil.
Tape is NOT suitable for textured,
porous, popcorn and ceiling surfaces
(ie. wallpaper or brick walls).