Application; Specifications; Change Of Batteries; Charger - Instrumax CONSTRUCTOR 360 4V Manual Del Usuario

Congratulations on the purchase of laser level IN-
STRUMAX CONSTRUCTOR 360 4V!

Application

Cross Line Laser projects visible laser planes. It is used
for determination height, making horizontal and vertical
planes.

Specifications

Laser beam 4V1H (360º)1D
Light sources 635 nm
Laser safety class Class 2, <1mW
Accuracy ±0.3mm/1m
Self-leveling range ±3°
Operating range
without/with receiver 20/70 m*
Rotation/Fine adjustment 360°
Power source Li-Ion battery 3,7V and 3xAA / 1,5V
Tripod thread 5/8''
Operating temperature -10°C +35°C
Weight 1,16 kg
*working range depends on illumination: working range decreases in
bright conditions and increases in poor lighting.

Change of batteries

Open battery compartment. Insert batteries. Take care to
correct polarity. Close battery compartment.
ATTENTION: Take out batteries If you are not going to use
instrument for a long time.

Charger

It is possible to use charger to operate with the instrument.
Use charger for rechargeable batteries. Connect the charger
to the hole (8) that is located on the housing of the instru-
ment. Then connect it to the main power. The instrument is in
working condition and rechargeable batteries are charging.
WARNING: Never use charger for ordinary batteries. Do
not leave the instrument unattended while using char-
ger. Parameters of the charger must correspond to the
parameters of domestic electricity. Output voltage must
be no more than 5V.
3