Additional Safety Instructions; After Use; Residual Risks - Black and Decker BDCINF18 Manual Del Usuario

ENGLISH
Check for breakage of parts, damage to
switches and any other conditions that
may affect its operation.
Do not use the appliance if any part is
u
damaged or defective.
Have any damaged or defective parts
u
repaired or replaced by an authorized
repair agent.
Regularly check the charger lead for
u
damage. Replace the charger if the
lead is damaged or defective.
Never attempt to remove or replace
u
any parts other than those specified in
this manual.

Additional safety instructions

Inflate bike tires, balls, rafts, swimming
u
pool floats, air mattresses, and more in
and around the home. Recommended
maximum continuous duty at 65 psi is
2 minutes on with 5 minutes off.
The compressed air from your inflator
u
is not safe for breathing. Never
inhale air from your inflator or from
a breathing device connected to the
inflator.
Too much air pressure causes a
u
hazardous risk of bursting.
Check the manufacturer's maximum
pressure rating for objects being
inflated.
Do not leave inflator running
u
unattended. It could burst tires or other
items.
Use a tire gauge to check the tyres
u
pressure before each use and while
inflating tyres; see the tyre sidewall for
the correct tyre pressure.
4
(Original instructions)
Do not modify or attempt to repair.
u
Never drill into, weld, or make any
modifications to the inflator or its
attachments.
Operate only with the accessories in-
u
cluded or air handling parts acceptable
for not less than 160 psi.
The use of any accessory not recom-
u
mended for use with this tool could
be hazardous.
Never "horseplay." High pressure air
u
is dangerous. Don't direct air-flow at
yourself or others.
Warning! Always leave the valve adaptor
lever open when not in use.
Inflator can become hot during use.
u
Allow inflator to cool 30 minutes before
storing away.

After use

Unplug the charger before cleaning.
u
When not in use, the appliance should
u
be stored in a dry place.
Children should not have access to
u
stored appliances.

Residual risks

Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings. These
risks can arise from misuse, prolonged
use etc.
Even with the application of the relevant
safety regulations and the implementa-
tion of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any
u
rotating/moving parts.