Electrical Safety - Black and Decker BDCINF18 Manual Del Usuario

Injuries caused when changing any
u
parts, blades or accessories.
Injuries caused by prolonged use
u
of a tool. When using any tool for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.
u
Health hazards caused by breathing
u
dust developed when using your
tool (example:- working with wood,
especially oak, beech and MDF.)
Batteries
Never attempt to open for any reason.
u
Do not expose the battery to water.
u
Do not store in locations where the
u
temperature may exceed 40 °C.
Charge only at ambient temperatures
u
between 10 °C and 40 °C.
Charge only using the charger
u
provided with the tool.
If the appliance is to be stored unused
u
for a long period, the batteries should
be removed.
When disposing of batteries, follow
u
the instructions given in the section
p
"Protecting the environment".
Do not attempt to charge dam-
aged batteries.
Chargers
Use your BLACK+DECKER charger
u
only to charge the battery in the tool
with which it was supplied. Other
batteries could burst, causing personal
injury and damage.
Never attempt to charge non-
u
rechargeable batteries.
(Original instructions)
Have defective cords replaced
u
immediately.
Do not expose the charger to water.
u
Do not open the charger.
u
Do not probe the charger.
u

Electrical safety

Symbols on the charger
Read all of this manual carefully before using the
#
appliance.
This tool is double insulated; therefore no earth wire
is required. Always check that the power supply
$
corresponds to the voltage on the rating plate.
The charger is intended for indoor use only.
Labels on appliance
The following symbols appear on this appliance along with the
date code.
Warning! To reduce the risk
of injury, the user must read
the instruction manual.
Do not expose the appliance
to rain or high humidity.
Before performing mainte-
nance or cleaning on the
appliance, unplug the supply
cord.
Do not leave the inflator
unattended.
#
Class II appliance
Features
This tool includes some or all of the following features.
1. AC/DC power switch
2. Mode power switch
3. LCD
4. Pressure setting buttons
ENGLISH
5