Cold Start - AL-KO solo 163-55 Traducción Del Manual De Instrucciones Original

en
Adjusting the angle of the rear handle
The rear handle can be turned up to 90° to the right or
left, and locked.
How to adjust the angle:
Pull the release lever (19A), in order to release the
1
locking for the handle
2 Turn the handle to the desired angle between 0° and
90°.
Ensure that the release lever (19A) returns to its origi-
3
nal position, and that the handle lock has engaged.
CAUTION!
Do not actuate the throttle lever while the handle lock is released. Do not release the handle
lock during cutting work.
Starting the machine
Move at least 3 m away from where refuelling took
place.
Place the hedge trimmer on a clean base.
Ensure that the cutting blade does not come into con-
tact with the ground or other objects.

Cold start:

If the motor is cold, or has been switched off for more
than 5 minutes, and after refuelling.
2 Gently press the starter pump several (7 to 10) times
(15B), until fuel enters the starter pump.
3 Bring the choke lever (16C) into position .
34
(19)
(15)
(16)
Operation
163-55 / 163-70