GOAL ZERO SWITCH 10 Guia De Inicio Rapido página 4

CHARGE YOUR GEAR
Goal Zero Switch 10 is designed to
charge POV cameras, phones, and other
handheld USB-powered gear.
What It Powers:
7"
POV Camera Phone Tablet Flashlight
2x 1x 25% Boost
1. Using your gear's charging cable, plug into Goal Zero Switch 10's
USB output.
2. Goal Zero Switch 10 will automatically begin charging when you plug in
your gear.
Certified Cables
Goal Zero Switch 10 comes with certified cables to efficiently charge your gear.
1. Plug the included cable into Goal Zero Switch 10's USB output.
2. Keeping one hand on the cable slide the metal collar up one click, and twist the
collar in the direction indicated by the "tighten" arrow until snug. Be careful not
to over tighten the collar.
FLASHLIGHT TOOL
Goal Zero Switch 10 Flashlight is a bright,
110 lumen LED light with an adjustable beam.
1. Plug the flashlight tool into Goal Zero
Switch 10's USB output.
2. Keeping one hand on the flashlight slide
the metal collar up one click, and twist
the collar in the direction indicated by the
"tighten" arrow until snug.
3. Twist the silver collar to focus.
FLASHLIGHT
Built-In Flashlight
Goal Zero Switch 10 also comes with a
small, built-in flashlight. Turn it on/off by
lightly pressing the button on the light.
4
Included:
Fan
4 Hours 5x
Built-In
Flashlight Button
FAN TOOL
Goal Zero Switch 10 Fan is a lightweight
and quiet way to cool off.
1. Attach the soft fan blades to the motor
by sliding the two pieces together.
2. Plug the assembled fan tool into Goal
Zero Switch 10's USB output.
3. Keeping one hand on the fan slide the
metal collar up one click, and twist the
collar in the direction indicated by the
"tighten" arrow until snug.
REPLACEABLE BATTERY
The battery inside the Goal Zero Switch
10 is replaceable. Over time, the lithium
battery inside Goal Zero Switch 10 will lose
its efficiency. If you notice your Goal Zero
Switch 10 isn't holding a charge, or is no
longer charging your gear as much, it might
be time to replace the battery.
1. Unscrew the USB charging end (Bottom)
of Goal Zero Switch 10 by grasping the
black cap and twisting to the left.
2. Remove the old battery and insert the
new Goal Zero 18650 lithium battery in
either direction.
TROUBLESHOOTING
Goal Zero Switch 10 Reset:
Plug Goal Zero Switch 10 into any live USB port to reset it.
3. Reattach the black cap and plug Goal
Zero Switch 10 into a live USB port.
You'll need to purchase the replacement
a Goal Zero 18650 lithium battery from
GoalZero.com – please note, Goal Zero
Switch 10 is not compatible with any other
18650 lithium battery. Our batteries are
engineered with built-in protections and are
optimized to power Goal Zero gear.
5