Safety Warnings - Ferm RSM1015 Manual Del Usuario

RECIPROCATING SAW
RSM1015
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.

SAfETy WARNINGS

1
WARNING
Read the enclosed safety warnings,
the additional safety warnings and
the instructions.
Failure to follow the safety warnings and
the instructions may result in electric
shock, fire and/or serious injury.
Keep the safety warnings and the
instructions for future reference.
The following symbols are used in the user
manual or on the product:
1
Read the user manual.
2
Risk of personal injury.
3
Risk of electric shock.
A
Wear a dust mask.
D
Variable electronic speed.
7
Double insulated.
8
Do not dispose of the product in
unsuitable containers.
9
The product is in accordance with the
applicable safety standards in the
European directives.
4
ADDITIONAL SAfETy WARNINGS fOR
RECIPROCATING SAWS
● Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
● Wear safety goggles, hearing protection and if
necessary other protective means, such as
safety gloves, safety shoes, etc.
● Before use, remove all nails and other metal
objects from the workpiece.
● Make sure that the workpiece is properly
supported or fixed.
● Do not use the machine without the guard.
● Inspect the saw blade before each use. Do not
use saw blades which are bent, cracked, or
otherwise damaged.
● Make sure that the saw blade is properly
mounted.
● Only use saw blades that are suitable for use
with the machine.
● Only use saw blades with the correct
dimensions.
● Do not use other accessories than saw blades.
● Do not use saw blades made of HSS steel.
● Do not use the machine on workpieces
requiring a maximum sawing depth that
exceeds the maximum sawing depth of the
saw blade.
● Hold the machine by the insulated gripping
surfaces where the saw blade may contact
hidden wiring or the mains cable. If the saw
blade contacts a ‚live' wire, the exposed metal
parts of the machine can also become ‚live'.
Risk of electric shock.
● Let the machine run at no load in a safe area
after mounting the saw blade. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
● Beware that the saw blade continues to rotate
for a short period after switching off the
machine. Do not attempt to bring the saw
blade to a standstill yourself.
Kickback
Kickback is the upward and backward movement
of the saw blade when the saw blade
unexpectedly touches an object. Securely hold
the machine with both hands during use.
Keep your attention focused on the operation.
Kickback is usually caused by:
- unintentionally touching hard objects or
materials with the rotating saw blade;
- a blunt saw blade;