Problems And Solutions; Technical Information; Technical Characteristics - LauraStar SMART I Manual De Instrucciones

Problems and solutions

Before calling the Laurastar Customer Service department, please check the following points:
Symptom
Makes a buzzing noise when steam is Vibration from the appliance.
emitted from the iron.
Makes a crackling noise when the The appliance has been set to heat up but
appliance is switched on. has not been filled with water.
The iron no longer emits steam. • The steam generator is empty.
The pressure has fallen.
• The appliance is switched off.
• The plug (23) is disconnected from the
mains socket.
Symptom
The soleplate drips. • The appliance has not been rinsed out
recently.
• The steam generator has been rinsed
with a product other than water.
The iron does not heat up. • The plug (23) is disconnected from the
mains socket.
• The appliance is switched off.
Symptom
There is no sound from the fan. The fan plug (25) is disconnected from the
mains socket.
The tip of the ironing board table becomes There is condensation inside the ironing
wet when folded. board table (1).
Return to the Customer Service department
Switch off the appliance and disconnect the plug (23) from the mains socket. Locate your purchase contract, invoice
or receipt. Call the Customer Service department and follow the instructions given.
Likely cause Remedy
This noise is normal for a new appliance,
it will disappear in the course of use.
Fill the water reservoir (11)
• Fill the water reservoir (11)
• Turn the main switch ON (16)
• Connect the power plug (23) to the
mains socket.
Likely cause Remedy
• Rinse out the Steam generator (15) until
the rinsing water does not contain any
more residues.
• Call the Laurastar Consumer Service.
• Plug in the appliance.
• Switch on the appliance.
Likely cause Remedy
Reconnect the fan plug (25) to the mains
socket.
• Leave the appliance open until the
water has completely evaporated.
• Use less steam. Please refer to the
instruction manual, paragraph «Steam
principles».
- 15 -
Laurastar App: questions and answers
Question
How can I keep in memory the settings I All the settings made with the Laurastar
have made with the App? App are automatically stored in your
Laurastar's memory and you will find them
each time you turn on your appliance.
How many smartphones or tablets can I It is possible to connect an unlimited
connect to my Laurastar? number of different smartphones or tablets.
When you start your Laurastar, you will find
the settings of the last smartphone or tablet
used.
How can I restore the factory settings Make a simultaneousz long press on the
(factory reset)? main ON/OFF and the fan speed button.
Keep the two buttons pressed for 10
seconds. When all the LEDs of the user
interface start to blink, the factory settings
are reset.

Technical information

Technical characteristics

Total output
Generator output
Iron output
Steam pressure
Steam generator capacity
Electricity supply 220-240 VAC / 50-60 Hz
Weight of iron
Total weight
Board height
Dimensions when folded (H x W x D)
Designation: Pressure steam ironing system
Answer Additional information
If several smartphones/tablets have been
connected, your Laurastar will recognize the
closest smartphone/tablet if the Bluetooth
function is activated.
Your Laurastar automatically loads the
settings of the closest smartphone or
tablet, if different from the last used and
if the Bluetooth function is activated.
WARNING
Intended or unintended incorrect handling
might cause erasing of the factory settings.
This voids the Laurastar warranty and
possible costs of repair will be in charge
of the user.
CE UL
2200 W 1600 W
1400 W 1000 W
800 W 600 W
3,5 bar 50 psi
1,1 l 37,2 oz.
120 VAC / 60 Hz
1,1 kg 2,4 lb
23,1 kg 51 lb
82-102 cm 32.3-40.2 in
132 x 42 x 22 cm 52 x 16.6 x 8.7 in
- 16 -
EN