Gardena ErgoJet 3000 Instrucciones De Empleo página 21

r
q
w
Attaching the collection bag:
t 3 2
z
Attaching the shoulder strap:
9332-20.960.01.indd 21
4. Place the hinge
bottom side of the unit.
5. Using the ground for support
tube snaps into the latches of the retaining posts
blower unit.
NOTE: A safety switch will prevent the
unit from starting if the vacuum tubes are
not installed correctly.
1. Align the grooves on the elbow tube
blower outlet
2. Push the elbow tube onto the blower outlet until it snaps into
place; elbow tube is secured by tube release button
3. Clip the collection bag
9
tube
NOTE: A safety switch will prevent the unit from starting if the
9
elbow tube is not installed correctly.
0
For extra support when using your unit as a vacuum, a shoulder
strap is included with your unit. Attach the strap to the unit before
u operation. Snap the hook onto the retainer
w
of the upper tube into the hook
e
, pivot the blower unit until
2 .
z
to the loops on the upper vacuum
0
and lower vacuum tube
q
on the
r on the
"Snap"
t
with the grooves on the
3
.
.
u
.
e
21
04.01.12 07:47