Service Centre - Probuilder 69911 Manual De Instrucciones

IMPORTANT:
Do not remove the front cover when the
motion sensor is connected to the power.
If there are diff erences between the
instruction manual and the actual product,
then you should use the actual product as
your guide.
Troubleshooting
The connected equipment does not turn
on:
a. Check that the cables from the
installation site and from the connected
equipment are attached correctly.
b. Check that the connected equipment
functions correctly.
c. Check that the motion sensor's light
sensitivity (LUX) is set correctly.
Poor sensitivity:
a. Check if there are any obstructions
in front of the sensor lens that are
preventing the motion sensor from
detecting motion correctly.
b. Check if the ambient temperature is too
high.
c. Check if the motion is within the
detection � eld.
d. Check if the installation height is within
the stated speci� cations.
e. Check if the motion is in the right
direction.
20
The motion sensor does not automatically
turn off the connected equipment:
a. Check if there is continuous motion in
the detection � eld.
b. Check if the operating time (TIME) is set
to the maximum operating time.
c. Check if the connection has been made
in accordance with the instructions.
d. Check if hot air is being discharged in the
detection � eld, e.g. from air-conditioning
systems or heat sources.

Service centre

Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
• Complaints
• Replacement parts
• Returns
• Guarantee issues
• www.schou.com