AIPTEK MobileCinema i70 Manual Del Usuario página 10

User's Manual
Troubleshooting
Symptom
The projector still can't be
turned on after 10 seconds
of waiting.
The projecting image is too
blurry.
The temperature of the
projector's surface is warm.
The projector does not work
when connecting to a
notebook PC.
Recovering from abnormal
Check Point
Ensure the battery is fully
charged.
1. Adjust the focus by using
focus wheel.
2. Check if the projection
lens is clean or not, clean
it if dirty.
It is normal for this projector
to generate moderate heat
during operation.
1. Check if the HDMI cable
is plugged correctly.
2. Make sure the PC has
been switched to projector
display.
If the projector is running slow,
freezing, crashing or locking up
during the operation, you can
try to insert a slim, pointy object
into the reset hole to trigger a
hardware reset.
10