Using The Buttons; Basic Settings; Setting Time And Date - CICLOSPORT CICLOPULS CP 16is Manual Del Usuario

Pull the belt tight so that it
cannot slip and constant
contact with the body is
guaranteed during movement.
If the CP 16is fails to display
any heart rate, it probably
means that there is no contact
between the skin and the
electrodes. Moistening the elec trodes and the underlying
skin often helps. Best results are obtained if electrode gel is
used (available from pharmacies).

3. UsInG tHe BUttOns

CICLOPULS CP16is
is fitted with two buttons:
Mode button
set button
CP16iS_engl.indd 5

4. BAsIC settInGs

4.1 setting time and date

Electrodes
Press the Mode button several
times until the time and date are
Transmitter
displayed.
If the Mode button is pressed and
held for 3 seconds the 12 or 24 hour
clock will flash on the display.
If the Set button is then pressed briefly, either the 24 or
12 hour clock may be selected.
If the 12 hour clock is selected, the US calendar format of
month/day will also be automatically selected (European
format: day/month).
25
10.04.12 14:22