Sporasub Flash Manual De Instrucciones página 10

•
Unscrew, in the counter clockwise direction,
the front face of the flashlight.
•
Insert the batteries following + / - directions
indicated on the rack.
•
Lubricate the watertight ORings with a thin
layer of silicone.
•
Screw down, in the clockwise direction, the
face of the flashlight.
•
Make sure that the flashlight turns on
correctly by activating the switch.
WARNING If the batteries are placed in the
wrong position (inverted polarities), a short
circuit will be created, causing permanent
damage to the flashlight, with the possibility of
explosion!
CHECKS TO BE CARRIED OUT BEFORE DIVING
•
If the flashlight hasn't been used for some
time, check the state of the batteries by
turning on the flashlight.
•
Make sure the body is perfectly closed.
•
Once in water, check that there is not a
constant presence of air bubbles coming
out of the flashlight body.
8