Sporasub Flash Manual De Instrucciones página 12

REPLACING THE LED LIGHT
•
Unscrew the front face ring plate.
•
Remove the LED to be replaced, and insert
the new LED, making sure that it fits with
the slot in the flashlight body.
•
Re-insert everything and screw on the front
panel,
lubrication of the watertight ORings.
MAINTENANCE AND TRANSPORT
It is important to follow the following instructions:
•
Always transport the flashlight in a bag that
protects the flashlight from impact or shock.
•
Avoid leaving the flashlight in direct sunlight.
•
After each dive (sea, lake, or swimming
pool), rinse with fresh water and then dry.
•
Check the state of the watertight seals
(ORings) each time the front is opened.
•
Clean and lubricate the parts of the
opening, using silicone oil/grease.
•
We recommend yearly checks by an
authorized service centre.
preventively
10
carrying out the