Focus Feedback; Select The Print Quantity - Kodak ADVANTiX Manual De Instrucciones

Focus feedback

Since it may be difficult to tell if your picture
is in focus on the small Preview Screen,
the camera provides feedback on where it
focused. To use this information:
1. Estimate the camera-to-subject distance.
2–3 '
(0.6– 1.0 m)
3–13 '
(1.0–4 m)
Beyond 13' (4 m)
2. Compare your
estimate to the
green icon
shown below
the preview
screen (12).
3. If the icon is
different from your estimate, for
example, the picture
is near but the icon is far, then you may
want to take another picture using the
Center-spot focus feature
(see page 22).
Near
Middle
Far

Select the print quantity

You can select the number of prints,
from 0–9, that you want your photo-
finisher to print. If you are happy with
the picture, you can order multiple prints.
Selecting multiple prints does not mean
that you will use more film. The camera
exposes one frame of film for every
picture that you take no matter how
many prints you order for each frame.
If you are unhappy with the picture,
you can select "0" for zero and take a
new picture. The picture remains on the
film and prints can be made from it
later, if you change your mind.
1. Press
(14)
PREVIEW
to view the
picture. The
print-quantity
number P"1"
blinks.
2. Move the zoom dial (13) to select
the print quantity.
3. Press (16) or close the
ENTER
lens cover/flash (2) to save the
print quantity.
EXP
LEFT
AUTO
ISO
15