Spare And Wearing Parts - Bosch DCU 220 Manual Original

en | 24 | DCU 220 | Maintenance
6.4 Recovery process
i
If the preset Win 10 settings are to be restored,
start the recovery process.
!
All of the data and applications on your hard disk
are deleted during the recovery process!
1. Connect the DCU 220 to the power supply unit.
2. Switch on the DCU 220.
3. If the following screen appears while the system
is starting, hold down the keys Ctrl + Alt + F2 for
4 seconds.
!
If DCU 220 does not open the recovery menu,
DCU 220 must be shut down with the <Shift
> key pressed and the recovery process must be
restarted.
4. To start the recovery, select <Recovery> in the
screen which appears.
i
The progress bar shows the percentage of comple-
ted recovery. During the recovery process, the pro-
gress bar reaches the 100 % multiple times. After
the process is finished, the system turns off.
|
1 689 989 464 2021-03-24
5. Turn the DCU 220 on.
 The windows Setup Wizard starts.
6. Follow the instructions on the screen.
i
When the system restarts, the installation screen
appears. The installation program identifies the
system hardware and installs the drivers.
"
After installation is over, the system restarts and the
Windows desktop appears.
6.5

Spare and wearing parts

Designation
DCU 220 tablet PC
2)
Carrying handle
Storage battery (1 unit)
<)
Hard disc (256 GB)
1)
Hard disc (512 GB)
1)
Case
Power supply unit
German power supply cable
Stylus (3 unit)
<)
wearing part
<)
depending on the variant
1)
Ask your authorized Bosch retailer for the order number
2)
Order number
–
1 684 736 024
1 687 335 047
1 687 370 326
1 687 370 327
1 685 438 656
1 687 023 844
1 684 461 186
1 683 083 013
Robert Bosch GmbH