Siemens Pointek CLS500 Manual De Arranque Rápido página 8

7. Replace the enclosure cover and tighten the retaining set-screw.
instrument
system ground
measuring signal
(mini-coaxial
cable)
ground connection point
for instrument system
Handling electrodes
WARNINGS:
• Do not scratch or gouge the electrode insulation since this could
reduce the integrity of the insulation and the useful life of the
electrode.
• Do not damage the insulating sleeve on the electrode during shipping,
packing, and installation. Any damage to the electrode can prevent
proper performance.
• (ATEX 95): Precautions MUST be taken to avoid ignition due to
hazardous electrostatic discharges:
a. where an isolated probe is used in gas, vapor, or a non-
conductive liquid that is potentially explosive, requiring
apparatus group IIC equipment
b. where the probe is used in a potentially explosive dusty
atmosphere
Page EN-6
ground lug
Type:
Ser.:
Date:
Rev.:
Tampering voids warranty
Pointek CLS500 – QUICK START MANUAL
protective label
(see warning
above)
solid-state
switch relay
(any polarity)
4-20 mA
current-loop
connection
(any polarity)
7ML19985XS81