Publicidad
Idiomas disponibles
Idiomas disponibles
Vehicle Forward
Passenger 's side muffler heat shield
Tighten 8mm-1.25 Gr. 10.9 bolts with torque wrench to 27 Lb.-Ft. (37 N*M)
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
© 2010, 2011, 2014, 2015 Cequent Performance Products – Printed in Mexico
Installation Instructions
Hyundai Sonata, Kia Optima
All models
Detail showing how to trim muffler heat shields.
Driver's side heat shield trimmed opposite
11"
2-1/2"
2-1/2"
This area to be cut out
with metal shears.
Tighten 3/8"-16 Gr.5 bolts with torque wrench to 45 Lb.-Ft. (61 N*M)
Sheet 2 of 6
24853N
Part Numbers:
24853
60269
77225
Cut 1/2" from
center of hole
6"
Nip corner
10-07-15
Rev. D
Form: F205 Rev A 5-6-05
Publicidad
