Cleaning And Maintenance - cecotec BigDry 2500 Pure LighT Manual De Instrucciones

Dehumidification button
• Press the dehumidifier button (12) when the machine is turned on and the machine will
dehumidify with the purification function.
• Press the dehumidifier button (12) again to switch off the dehumidification function
off. The purification function will continue operating. The LED indicators will light up
accordingly.
Mode button
• Press the mode button (13) to set the intensity of purification once it's activated.
• This button has two modes, a high intensity or a low intensity.

5. CLEANING AND MAINTENANCE

Draining collected water
• The water tank has a maximum capacity of 1000ml with a 750 ml/ per day working
capability.
• When the water tank is full, the full tank LED indicator will light up.
• Switch off and unplug the machine.
• Avoid tilting it and carefully remove it, slide the water tank cover open and pour the water
out.
• Insert the water tank cover and then insert the water tank back into the unit and press the
power/purification button (11) to resume operation.
• Do not damage or remove the water tank float as this can
affect the operation of the appliance, cause water leaks and
malfunction.
Cleaning and storing the device
• Make sure the unit is powered off and that the power cable is disconnected from the
power source.
• Use a soft cloth to clean away any dust or debris from the surface of the unit or the air
inlets.
• Pull out the water tank and slide out the cover to clean the water tank.
• Do not clean the filter with a vacuum cleaner or wash it directly, just put the filter under
the sun to sterilize it regularly.
05604_BigDry 2500 Pure Light_manual_LB.indd 27
BIGDRY 2500 PURE LIGHT - BLACK
ENGLISH
27
12/9/19 9:46