Publicidad
Step 8
With someone's help, carefully stand your unit upright and place your unit above your toilet.
å
Next, hold the BRACE (N) between the LOWER ENDS (B and D) clear of all plumbing obstacles to determine which set of
å
holes to turn your CAM SCREWS (20F) into.
Remove the BRACE and turn a CAM SCREW (20F) into one each of the set of six holes in the LOWER ENDS (B and D).
å
Push two HIDDEN CAMS (1F) into the BRACE (N).
å
Push two METAL PINS (1R) into the short edges of the BRACE (N).
å
You may need to slightly widen the LOWER ENDS (B and D) to fasten the BRACE (N) to them. Tighten two HIDDEN CAMS.
å
NOTE: Be sure the METAL PINS (1R) push into the holes in the LOWER ENDS while tightening the HIDDEN CAMS.
å
D
20F
www.sauder.com/services
Arrow
B
20F
Turn a CAM SCREW
into one of these holes
to fasten the BRACE (N).
Arrow
1F
1F
N
1R
414111
1
2
1R
Arrow
Hole
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Page 11
Publicidad
