Zenith chapter 2138ALKWM Instrucciones De Ensamblado página 4

2. NOTE: ASSEMBLY SHOWN FOR 88 IN. OPENING HEIGHT. The following assembly should
be modified based on your opening height, SEE CHART ON PAGE 3.
Place a wedge (E) (tapered or rounded end up) on one of the long tapered tube (A)
approximately half way down. Slide a shelf (D) down the tube and fit over the wedge (E).
Repeat process for another shelve (D). Shelves can be adjusted by moving the
wedges (E) up or down.
Repeat process for other long tapered tube (A) and other shelf (D).
tapered end at the top
A
E
E
D
E
Pg 4 of 27 1-800-892-3986 IS02138-I3